184RH Installation Kit

Question

Q: Is 184 and 184r the correct mounts for a 2012 f150 pillar mount? Just transferring from another vehicle

Asked by: Jason - 11/1/2016

Submit an answer

Q: DO YOU HAVE A DRIVER SIDE POST MOUNT SPOTLIGHT MOUNTING KIT FOR1995 FORD E350 ECONOLINE CLUB WAGON ? THANKS DON

Asked by: DON - 4/6/2019

Submit an answer

Q: Is this a vehicle specific kit or just a generic install kit?

Asked by: Jeff - 8/1/2019

Submit an answer

Q: Can this be installed on a 2014 F150 with Factory tweeters in the A Pillers on the drivers side?

Asked by: Dave Wieczorek - 11/25/2020

Submit an answer

Questions about this item? Ask here.

Accepted Answer

For a 2012 F150, 184RH should be used on driver side and 184 on passenger side. (this is special case where sides are reversed) They should be used to mount spotlight with a CL length shaft. (10" exposed shaft* and 15 1/2" center to center**)

*Exposed Shaft: The amount of tubing visible between the head housing and handle housing when the spotlight is assembled.

**Center to Center: The distance between where the gears mesh in the handle and where the gears mesh in the head when the spotlight is assembled.

Accepted Answer

A: 1995 Ford E350 Econoline uses a spotlight with a PL length shaft mounted with a 29RH installation kit for driver side mount or 29 installation kit for passenger side mount.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Unity: Brian (4/8/2019)

Accepted Answer

A: Due to the differences in vehicle design we do not have a generic installation kit. All kits fit specific vehicles, some kits works on multiple vehicles due to similarities in design.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Unity: Brian (8/1/2019)

Accepted Answer

A: According to our engineering records the shaft of the spotlight should come under the speakers and not be an issue.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Unity: Brian (11/25/2020)