27 Installation Kit

Question

Q: does it come with a template?

Asked by: Dave - 4/6/2016

Submit an answer

Q: I am trying to install a spotlight in my 1986 Ford Bronco... I think I read the chart correctly but want to make sure! It says that I need part# 225GM-H for the spotlight and part# 27 for my installation kit. Can someone please let me know if these are the correct items that I am looking for??? Thank You!

Asked by: BroncoManiac - 9/22/2015

Submit an answer

Q: Will this work for a 2011 Ford Ranger?

Asked by: Questioner - 3/21/2016

Submit an answer

Q: Is 27 the correct installation kit for the driver's side of a 1990 Bronco (identical with 1990 F150)?

Asked by: DSTT - 5/13/2016

Submit an answer

Q: Do you have any kind of plug or cover kit if you want to remove the spotlight and cover the spot on the pillar?

Asked by: David - 4/7/2019

Submit an answer

Q: When special ordering out of stock items with a lead time 27, 27rh, what is typically the wait time? thanks

Asked by: mike - 12/24/2019

Submit an answer

Q: I own a 1990 Ford F-250 Pickup and am searching for a drivers post Spotlight or installation kit. Is there any resources to obtain either of these items?

Asked by: gar thornton - 5/8/2022

Submit an answer

Questions about this item? Ask here.

Accepted Answer

A: Installation kits come with mounting templates. If for some reason you vehicle is not included, let us know and we will send you the correct template.

Was this answer helpful? 4 of 4 Customer(s) found this Answer helpful.

Answer provided by: Staff (4/7/2016)

Accepted Answer

A: 27 installation kit is correct for the driver side of 1986 Ford Bronco. For passenger side 27RH is needed. 225GM-H will work with your vehicle or any spotlight with a "GM" length shaft.

Was this answer helpful? 3 of 4 Customer(s) found this Answer helpful.

Answer provided by: Staff (9/22/2015)

Accepted Answer

No, a 2011 Ford Ranger should use a 29RH installation kit for driver side or 29 installation kit for passenger side. This should be used to mount a spotlight with a "H" length shaft.

http://www.unityusa.com/29RH-Installation-Kit_p_1590.html

http://www.unityusa.com/29-Installation-Kit_p_758.html

http://www.unityusa.com/H-Shaft_c_1567.html

Accepted Answer

27 installation kit is correct for driver side of a 1990 Bronco. 27RH should be used for passenger side. They should be used to mount a spotlight with a "GM" length shaft ( 9" exposed shaft* and 14 1/2" center to center**)

A 1990 Bronco II would use a 29 installation kit on driver side and 29RH on passenger side with a spotlight with a "V" length shaft (7 1/2" exposed shaft* and 13" center to center**)

Exposed shaft – the amount of tubing visible between the head housing and handle housing when the spotlight is assembled.

Center to center – the distance between where the gears mesh in the handle and where the gears mesh in the head when the spotlight is assembled.

Accepted Answer

A: No, we do not.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Unity: Brian (4/8/2019)

Accepted Answer

A: Lead time will vary depending on when item is ordered. Right now we estimate about a one week lead time on 27 and 27rh but that does not account for disruptions from the Holidays.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Unity: Brian (12/26/2019)

Accepted Answer

For the spotlight part, any spotlight with a GM length shaft will work, but unfortunately you would need a 27 installation kit to mount it and they are no longer available. Your best bet would be looking for the kit being resold on somewhere like ebay.