U-8384-P Wedge (For spotlight with flat)

A: Yes and no. This will fit some spotlights, but not others. It is not specific to LED or Halogen spotlights. This wedge should be used with a U-8385 wedge screw if you have a spotlight with a flat on the inner shaft. If your spotlight does not have a flat U-1834 wedge and U-1836 wedge screw should be used.

If you need help determining if your specific light has a flat please feel free to use the Contact Us feature of our website. We will need to know either the spotlight part number or if you don't have that information the make, model and year of the vehicle the light is installed on.

https://unityusa.3dcartstores.com/crm.asp?action=contactus Answer provided by:  Staff (7/15/2015)

A: This is the only version available. They are made of die cast zinc. They are designed to be softer than the materials used to make the shaft and handle assembly so that if they are installed incorrectly they will not damage the shaft or handle housing. Answer provided by:  Staff (6/30/2016)

A: Yes, they are the same part number and it is correct part for 2005 Crown Vic Police.

The "U-" in front of a number is for internal use of designating a salable version of the part number over the production part number. It normally appears on parts. Answer provided by:  Staff (2/17/2016)

A: Without knowing shipping destination I can't run a check to see if there are alternate shipping methods. We do have a USPS option that is normally cheaper for small parts than UPS. During checkout "Display rates" needs to be clicked to view the price.

We cannot put the parts in an envelope. We have tried that in the past and there have been too many issues that we no longer ship parts that way.

For a small part like this, going through a local distributor can be better to avoid shipping costs. We have a distributor search that can be found here: http://search.unityusa.com/distributor.php

This part is also carried at Amazon:
http://www.amazon.com/Unity-U-8384-P-Spotlight-Wedge-Bushing/dp/B00I0QN35A/ref=sr_1_1?ie=UTF8&qid=1455717344&sr=8-1&keywords=u-8384-p Answer provided by:  Staff (2/17/2016)

A: This item should be in stock and will just need processing time. Depending on when the order was placed allow 1 to 2 business days before this part ships from our factory. Answer provided by:  Staff (2/24/2016)

A: That does not sound like our spotlight. On the base of the head on the backside does it say Grakon 6000? If so that is not ours. Answer provided by:  Staff (3/15/2016)

A: Do you know the part number of the light or did you purchase it used? If the light was used do you know what vehicle it was previously on and what side of the vehicle? What is make, model, and year of the vehicle you wish to mount the light onto? Are you mounting the light on Driver Side (LH) or Passenger Side (RH)?
Could you give us the two measurements from the light:

Exposed shaft – the amount of tubing visible between the head housing and handle housing when the spotlight is assembled.

Center to center – the distance between where the gears mesh in the handle and where the gears mesh in the head when the spotlight is assembled.
Answer provided by:  Staff (10/24/2016)

A: This is the correct wedge for the factory installed Charger spotlights. It should be used with a U-8385 Wedge Screw. We do not have any discount programs for Police Departments through our website. You may be able to work something out with one of our distributors.

Below is our distributor search. It uses zip codes to locate distributors near you. The less numbers of the zip code you enter, the wider the area it will search.
http://www.unityusa.com/Distributor-Search_ep_78.html

Answer provided by:  Unity: Brian (4/21/2017)

A: 211030-0002 spotlight would use a U-8384-P wedge and U-8385 Wedge Screw. Answer provided by:  Unity: Brian (8/25/2017)