Q: Model S04 - after screw removed, how does bezel come off for bulb replacement? twist? spring? pry?

Asked by: Tim - 7/13/2016
A: The ring/bezel of a model S04 spotlight twists off, like the lid of a jar, after the screw has been removed.
Was this answer helpful?  7 of 9 Customer(s) found this Answer helpful.
Answer provided by: Staff (7/13/2016)
Submit an answer

Q: Hello. How do I know which replacement light bulb is the correct match for my spotlight? I have a 2003 Ford Crown Victoria P.I. Thank you for any suggestions.

Asked by: Rona - 9/13/2016
A: Replacement bulb would be U-H3-100W. For whole replacement lamp assembly use U-7682.
Was this answer helpful?  3 of 6 Customer(s) found this Answer helpful.
Answer provided by: Staff (9/14/2016)
Submit an answer

Q: will this lens fit on a S04 model since we can't find a lens? Is there just a lens available for purchase?

Asked by: Jeff - 4/7/2016
A: This is the correct replacement halogen lamp for model S04 spotlight. It is only available as the full lamp assembly.
Was this answer helpful?  2 of 3 Customer(s) found this Answer helpful.
Answer provided by: Staff (4/7/2016)
Submit an answer

Q: How do you install replacement lamp using the springs?

Asked by: Mike - 7/18/2015
A: The springs are used when installing the lamp into a model S6 spotlight head. Here are instructions on how to do it:

http://www.unityusa.com/assets/images/7877%20Spotlight%20Lamp%20Replacement%20Instructions%2003-01-09.pdf
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Staff (7/20/2015)
Submit an answer

Q: I just bought a 2002 crown vic police interceptor and the spotlight bulb is burnt out. would this item be a proper fit? if no how would I go about finding the required information?

Asked by: TI - 10/12/2015
A: If it was factory installed and is marked Model 325-380, then it is the correct one.
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Administrator (10/13/2015)
Submit an answer

Q: Is this a direct replacement for the old part 8172CAV.1?

Asked by: Lori - 11/24/2015
A: 8172CAV.1 is a production code and not related to the part number. I believe that code is used only on Model S04 shell (the model number would be on the back of the shell on the outside near where the shell connect to the rest of the spotlight.) If the shell is an S04, this lamp will work in it for spotlight applications. We also now have U-8547 LED Lamp that will also work in S04 shell.

http://www.unityusa.com/U-8547-6dia-LED-Clear-Spot-Lamp_p_1789.html
Was this answer helpful?  1 of 2 Customer(s) found this Answer helpful.
Answer provided by: Staff (11/24/2015)
Submit an answer

Q: shipping price to fla?

Asked by: - 9/18/2015
A: Depends on items ordered, how many of each items, type of shipping, and specific location shipped to.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Staff (9/18/2015)
Submit an answer

Q: I have a number of these spotlights on my one year old Police Vehicles. I have two with lens cracks. I can't tell if they are from road hasard stone throws or something else. We rarely drive on highway so I can't imagine what has impacted them to cause a crack. is this an ongoing problem and what part number do I need to replace them?

Asked by: Michael Moscato - 5/2/2016
A: Cracking without an external cause is not a common issue. Cracking is normally caused by something hitting the light, like a rock on the road or vandalism. Sometimes extremes in temperature, and certain chemical cleaners can also cause a crack. Replacement part number is U-7682.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Staff (5/2/2016)
Submit an answer

Q: I have a 2011 Tahoe PPV. The spotlight bulb is okay, but the lens it fits into needs replaced. Is there a part number, or do I need to replace the entire unit? Thanks, Dave

Asked by: Dave - 10/26/2016
A: The lens is only available in the full U-7682 assembly.
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: Staff (10/27/2016)
Submit an answer

Q: what is the diameter? need 5 in.

Asked by: steve haun - 6/18/2017
A: This lamp is size PAR 46 it is nominal 5.5" diamter. It is used in our 6" lights. If you are looking for lamps for our 5" lights they are PAR 36 size
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (6/19/2017)
Submit an answer

Q: Once this kit is installed do i use the h3 bulbs?

Asked by: Mac - 1/19/2019
A: When replacing for a burned out bulb, all that is needed is replacement H3 bulb (our part number U-H3-100W). The rest of the assembly does not need to be replaced.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (1/21/2019)
Submit an answer

Q: What is the LED version of this bulb? Thanks

Asked by: BILL - 1/18/2020
A: We do not have an LED version of the bulb that goes in this lamp. U-8547 LED Lamp will replace this lamp.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (1/20/2020)
Submit an answer