Q: What installation kit for a 1991. F350 L & R post? Thanks

Asked by: Steve - 8/8/2016
A: 1991 F-350 uses a 27 installation kit for driver side and 27RH installation kit for passenger side. These should be used to mount a spotlight with a "GM" length shaft.

http://www.unityusa.com/27-Installation-Kit_p_757.html

http://www.unityusa.com/27RH-Installation-Kit_p_1589.html

Correct parts can be found by using our application search found in the Searches tab or here: http://search.unityusa.com/application.php
Was this answer helpful?  4 of 6 Customer(s) found this Answer helpful.
Answer provided by: Staff (8/9/2016)
Submit an answer

Q: Is this the kit that fits part # 207010?

Asked by: Tony - 10/1/2015
A: All of our kits will fit all of our spotlights. Kits and spotlight combinations are vehicle related. We would need make, model and year to give you the correct parts.

207010 is most commonly used on 2015-2003 Freightliner Business Class M2. If that is what you are mounting the spotlight on it should be mounted with a 243RH for driver side or 243 for passenger side.
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Staff (10/1/2015)
Submit an answer

Q: Do you offer just the cup or bucket for the light and also the bolt and wedge that holds the handle on? Thanks, Wes

Asked by: Wes - 12/30/2015
A: 325A spotlight would use either a U-5547-0017 for just the shell and 7662-0003 for the full head.

http://www.unityusa.com/U-5547-0017-6-Shell-Assy--Model-S04--Chrome_p_1585.html

http://www.unityusa.com/7662-0003-6-Spotlight-Head--Model-S04--Chrome_p_621.html

Wedge and screw to secure handle is U-1834 and U-1836

http://www.unityusa.com/U-1834-Wedge_p_331.html

http://www.unityusa.com/U-1836-Wedge-Screw_p_294.html
Was this answer helpful?  1 of 3 Customer(s) found this Answer helpful.
Answer provided by: Staff (12/30/2015)
Submit an answer

Q: I am replacing the spotlights on a 1968 Seagrave open-cab pumper, where the spots are mounted on the top corner of the windshield frame, each side. Will the #1 installation kit take care of this? thanks, -Michael

Asked by: Michael Stemmler - 7/9/2015
A: If you still have the original brackets, you can determine what they are to replace them. On the back on the bracket there should be a number molded into it that says a number followed by a L or a R. If you can get us that number we can identify the bracket for you. If you use the "Contact Us" feature on our website we will be able to better address your individual case.

https://unityusa.3dcartstores.com/crm.asp?action=contactus
Was this answer helpful?  0 of 3 Customer(s) found this Answer helpful.
Answer provided by: Staff (7/9/2015)
Submit an answer

Q: will this fit a 2007 GMC sierra?

Asked by: brad - 3/5/2018
A: No, it would not work. 2007 was a change over model year for GMC. They had two different models that were both listed as 2007. One is the same as the 2006 (Classic) and one is same as 2008. Also there are two mounting options for both, Through the door frame and inside post. (inside post has the bracket mount inside of the vehicle instead of outside and requires a door notch) Also brackets are different for driver and passenger side.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (3/5/2018)
Submit an answer

Q: hello is this the kit required for a 1969 ford f100 truck or can you advise me of the part number ?

Asked by: craig miller - 4/14/2018
A: No, a 1969 Ford F100 uses a 185 installation kit for driver side or 185RH installation kit for passenger side. They should be used to mount spotlights with P length shaft.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (4/16/2018)
Submit an answer

Q: Will this kit fit my 1994 f150??

Asked by: Robert - 11/20/2018
A: 1994 Ford F-150 uses a 27 installation kit for driver side mount or 27RH installation kit for passenger side mount. They should be used to mount a spotlight with a V length shaft.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (11/21/2018)
Submit an answer

Q: I have a 73 f100 and s6 spotlight what kit do I need left side mount?

Asked by: rebel 2 - 2/16/2019
A: 1973 Ford F100 uses a 110 installation kit for driver side mount. It should be used to mount a spotlight with a GM length shaft.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (2/18/2019)
Submit an answer

Q: what kit is the best for a 1953 Ford f100 driver side mount spot light?

Asked by: Rick - 8/9/2020
A: 1953 Ford F100 uses a 15 installation kit for driver side mount. It should be used to mount a spotlight with a B length shaft.
Was this answer helpful?  0 of 2 Customer(s) found this Answer helpful.
Answer provided by: Unity: Brian (8/11/2020)
Submit an answer

Q: Sorry, should have told you the light is a model 325A? Thanks, Wes

Asked by: Wes - 12/30/2015
No Answers have been submitted yet.
Submit an answer

Q: Will the #1 kit/187 work on my 65 c10? Using a vintage s6 classic And what exactly do I need to cut the shaft down to? Sorry but couldn't really tell looking on a phone.

Asked by: Kenny Rowe - 10/3/2022
No Answers have been submitted yet.
Submit an answer