U-P46FLC 6" dia. LED Clear Narrow Flood Lamp

Question

Q: I bought these to replace the stock bulbs in my unity spot light housings but when I put them in neither one of them will light up. The stock ones both lit up just fine so I'm thinking that I need to make some changes in my wiring so they will work correctly, any advice?

Asked by: James Utz - 10/26/2015

Submit an answer

Q: What is the area covered by the width of the spotlight in feet?

Asked by: doug - 11/27/2015

Submit an answer

Q: Is a narrow "flood" lamp the same as a wide spot light?

Asked by: doug - 11/27/2015

Submit an answer

Questions about this item? Ask here.

Accepted Answer

These lamps should not be used in our post mounted spotlights. They are flood lights and do not meet SAE spotlight standards.

If these are being used in a decklight housing, the issue is most likely just needing to switch around the wires connected to the lamp. The the hot and ground wires connected into the lamp have to be connect to the correct screw terminal, otherwise the lamp will not function. Try switching around the hot and ground wires that connect the lamp to the spotlight.

Accepted Answer

A: This flood light has a beam spread of 16 degrees vertical by 16 degrees horizontal. We do not have any specs for the width in feet because the beam gets wider the further away from the light it is measured.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Staff (11/27/2015)

Accepted Answer

A: This lamp is only approved for use in flood light applications. It does not meet SAE standards for spotlight applications.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Staff (11/27/2015)

U-P46FLC 6" dia. LED Clear Narrow Flood Lamp

Related Items